Hi, I’m Jone Lee

Jpeg Image Optimization in CentOS for SEO and PageSpeed Ranking.

So here’s a quick guide on a completely automated way to optimize all your jpegs in CentOS to increase your pagespeed rank and hopefully boost your SEO too. This will also help get rid of any PageSpeed errors like “Optimize Images” by reducing file sizes by up to 40%!

An example of how Google wants you to optimize your jpegs in order to boost your pagespeed rank

1. Install jpegotim

yum install jpegoptim

2. open a SSH session or terminal and navigate to your folder where your website files are located. Generally under centOS this is /home/YOURWEBSITE

cd /home/YOURWEBSITE

3. Run jpegoptim against all jpegs

Just copy this code and run

find . -type f -name “*.jpg” -exec jpegoptim {} \;

Note: this will strip all image meta tags so make sure you don’t have any personal images in there

And done, wait for any caches to clear or clear them yourself and rerun Google PageSpeed Insights.

Using Magic Lantern’s minimum FPS mode for healthy time lapse projects.

As we all know, your typical DSLR is rated anywhere from 50,000 to 100,000 shutter cycles. Since an average time-lapse project would traditionally consist of thousands of photos, it becomes pretty easy to wear out your camera quicker than any average user. This is where the “magic” happens with the magic lantern firmware and the minimum FPS module feature in video mode. FPS override allows you to capture a time lapse in movie mode which keeps the shutter open. This means that the camera thinks you’re taking a movie but the actual FPS of the movie is going to be much lower than the default 25 or 30 FPS. This will avoid the shutter being opened and closed dozens of time per minute and ultimately help you prolong your camera body’s shutter by a significant amount. Since it’s in movie mode it’s not even using the shutter at all! It’s using the sensor to take photos and saving those precious shutter cycles. After I learned about this feature, I had difficulty finding a step-by-step tutorial. I was a little overwhelmed and frustrated on learning the procedure for this module. Finally, after messing around with the settings, here’s how I got it working.

Step One:

The first step is to install the Magic Lantern firmware to your Canon DSLR. I’m not going to go into much depth here but it’s really as simple as copying and pasting to your SD card. I’ll be putting together a guide for this in the future but for now simple search “install Magic Lantern” into google more info on this. Here’s the official website to download the nightly builds [http://www.magiclantern.fm/]

Step Two:

Now we’ll get into the settings. Even on the most basic level we’ll be using the following settings and modules to get the time lapse going without any external hardware. No buying intervalometers, wonky DIY solutions, or high-end camera bodies are needed. Everything is done on the software level which is why magic lantern is such a drastic improvement over the vanilla Canon settings.

Settings to enable:

• FPS Override – For timelapses you’ll generally want 3 frames-per-second (FPS) or less. Magic Lantern currently supports down to .2 FPS. Once you get that low however the shutter, exposure, and aperture settings get quite tricky. 3FPS is a good starting point.
• Exposure Override (Expo. Override) – This will control your shutter, aperture, and ISO settings. For the appropriate color balances you’ll want to fine tune this. If you’re not comfortable adjusting these settings you can give it a try without this feature but you’ll get some flickering due to the camera choosing all these settings for you in movie mode.
• Powersave in LiveView – Since we’re capturing a timelapse in movie mode, you’ll likely be recording for several hours at a time. Movie mode by default on Canon cameras keeps the screen on since it’s using LiveView mode. This module/setting in Magic Lantern will turn the screen off for you and keep battery use down to a minimum.

Step Three:

Here are the settings I used to get a good looking timelapse of the Philadelphia skyline. I used the amazon basics tripod and set up my Canon T2i (with the kit lens…for now) on the balcony of my apartment.

If you’re not familiar with Magic Lantern, you’ll have to click the erase button on your Canon camera body to get to the Magic Lantern settings.

Movie Tab:

This is the most vital step. Enable FPS override and choose your desired FPS. 3FPS will get you about 2 minutes of footage per hour. Obviously you can condense this after you shoot in programs like Adobe After Effects. Under advance settings I used the Low Jello mode to get fluid motion during the day time. If you’re shooting and want the exposure to be constant without flickering, I would also suggest you enable Constant exposure. This can cause issues with day-to-night transitions (as I learned) however so be weary of that and test to see if this feature will help you. At night I would suggest the low-light setting in place of Low Jello.  You can go down to .2 FPS to reduce file usage but you will definitely have to fine tune the shutter with exposure override.

Exposure Tab:

This tab contains the settings which are vital to how your timelapse is going to look in terms of brightness, focus, shutter speeds, and hence light-trails/motion blue. If you keep Expo. Override OFF, then the camera will use automatic settings like it always does when filming video on a Canon body. If you enable exposure override however, you’re in manual mode IN movie mode. Pretty cool right? Here you can define your ISO, shutter, aperture, and white balance. For a distant skyline, I liked a high aperture so I set it to 14. I had difficulty choosing a manual focus shutter so I left that at default which seemed to work well at about 1/5. You can customize this to your preference and it’ll reflect in your LiveView.

Prefs Tab:

If you want to shoot for more than an hour than battery life is going to become a concern. Fortunately, the geniuses at Magic Lantern have a setting to turn off the screen even when filming in Movie Mode. This allowed me to shoot for about 2 hours before battery life got pretty low (I wasn’t fully charged btw). I set it to turn off the LCD after 30 secs when on standby and while recording. This is pretty much something you have to set since the LCD kills the battery.

Set your MANUAL focus:

To avoid the auto-focus from going crazy on clouds, cars, whatever you’re going to want your lens in manual focus. I usually set the focus to infinity for distant horizon timelapses but you may choose otherwise. Focus is all up to you on this; it doesn’t affect Magic Lantern’s FPS override feature.

You’re ready! Simply push the LiveView/Record button on your camera body and the camera will do all the work. Your timelapse will be recorded as a movie and you can than start post-editing in your favorite video editing software.  Here’s what you can come out with.

Have any questions? Like this review? Send me a message at jim@jimwashkau.com

How to email your documents to the Texas DMV

so if you find yourself at the Texas DMV and you need documents that you don’t have printed out this is the email address you want to send your documents to. I was at the DMV the other day and of course I needed to print out additional documents I thought I had everything but I didn’t. So what they told me was that you can email the documents required to this email address and they would print it out for you. I thought that was incredibly intuitive and a great way to help people when they’re trying to get official documents I’ve lived in Pennsylvania and New Jersey and no other state allowed me to do this, good for you Texas for trying to help the common person.

So this is the email address to send your documents do if you can’t seem to find it or don’t remember. d remember, this is just for the mega center. Every center is likely different and you should try to get the email address in person or from an official if you can this is the one that was provided to me.

2BNORTHDLO@DPS.TEXASS.GOV